Dutch Boy® Nalcrete™ Acrylic Emulsion 7700
Dutch Boy® Nalcrete™ Acrylic Emulsion is an acrylic-type coating that forms an intermediate layer against dampness of new concrete surfaces. It heightens the performance of latex paints that are applied onto concrete in damp conditions. It can also be used as preparation for the installation of wallpapers.
Share :
PACKAGING:
4-Liters
FINISH:
Gloss
APPLICATION:
By brush, roller, or airless spray
VOC:
0.01 g/L
PRACTICAL COVERAGE:
25 to 30 square meters
DRY THROUGH:
To touch: 30 minutes
To recoat: 2 hours
THINNING SOLVENT:
Use as supplied.
TINTING:
Not applicable
CLEAN UP SOLVENT:
Water
SURFACE PREPARATION:
New concrete should be allowed to dry for 14 to 28 days under normal weather conditions before paint application. Surface to be painted should be clean, dry, free from oil, grease, dust, dirt, and other contaminants. If painting must be done immediately within the 14 to 28 day curing period, treat the surface with a solution of 1 part Dutch Boy® Nalcrete™ Masonry Neutralizer 7000 diluted in 16 parts water. Apply the solution liberally using a brush or roller. Let dry overnight before rinsing with water to remove white crystal that will have formed on the surface. Let dry before painting. If the concrete has been cured for 28 days or more, there is no need to apply a neutralizer.
PAINTING SCHEDULE:
Primer
Dutch Boy® Nalcrete™ Flat Latex 7510
2nd coat
Dutch Boy® Nalcrete™ Acrylic Emulsion 7700
Topcoat
Dutch Boy® Nalcrete™ Latex (Flat, Semi-Gloss, or Gloss)